Domino Sim2 Bedienungsanleitung PDF herunterladen (Seite 39)

Using the projector

Setup menu

Information menu

This menu shows you the current operating status of the projector.

Menu Settings

Menu Display Time

(10 sec)

Sets the length of time the OSD will remain active after your last key

press. The range is from 5 to 30 seconds in 5-second increments.

Menu Position

(Center)

Sets the On-Screen Display (OSD) menu position.

Input Source

Selects an input source to be projected. See "Selecting an input

source" on page 18 for details.

Auto Source Search

(Off)

Sets whether the projector searches automatically for input

sources. If the source scan is Off, the projector will scan for input

sources until it acquires a signal. If the function is not activated, the

projector selects the last used input source.

FUNCTION

(default setting / value)

DESCRIPTION

Lamp settings

Lamp Power (Normal)

Selects the projector lamp between Normal and Whisper modes.

Lamp Hours

Shows the lamp hours information. See "Getting to know the lamp

hour" on page 43 for details.

Pattern

Grid

Press ENTER to display the grid test pattern. It helps you adjust the

image size and focus and check that the projected image is free of

distortion.

Color Bar

Press ENTER to display the color bar test pattern. You can display this

test pattern to check that the colors are to your liking.

Dust Filter

Dust Filter Hours

Shows the dust filter hours information

Reset Dust Filter Timer

Resets the duster filter timer to '0'. See "To clean the filter" on

page 42 for details.

High Altitude Mode

(Off)

A mode for operation in areas like high altitude or high

temperature. See "Operating in a high altitude environment" on

page 31 for details.

Password

(Off)

Limits use of the projector to only those who know the correct

password. See "Utilizing the password function" on page 20 for

details.

Change Password

You will be asked to enter the current password before changing to

a new one. See "Utilizing the password function" on page 20 for

details.

Reset All Settings

Returns all settings to the factory preset values.

The following settings will still remain: the selected input source, the

position of lens shift, names of user modes, Keystone, Phase, Language,

Projector Position, Reset Dust Filter Timer, High Altitude Mode, and

Password.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Domino Sim2 Bedienungsanleitung Seite 39

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Domino Sim2